Explora-Dome.com
Explora-Dome.com
Pricing | Explora Dome I | Events | Specials | Forums | Photos | Dealers | Instructions | Media | Contact | Visit | HOME
     
 
Call us toll free at 800-328-7659
for more information on the Explorer Dome II call or
email us!

 

8-foot Round Explora Dome

8' Round Building assembly Here is the start of the 8' Round Building assembly. You fasten the lower wall ring to your platform
enclosure foam around the base Then you a put the enclosure foam around the base to seal up the siding steel from wind and bugs.
steel around the base Then you would stand the steel around the base ring and fasten it in place
slip the door assembly in place Once you have the siding in place you would slip the door assembly in place
install the wheels and guide brackets You would then install the wheels and guide brackets to the top of the mounting ring. You may need to re round the mounting ring and this can be done as shown.
slip the top mounting ring in place Then slip the top mounting ring in place, then you would install the enclosure foam strips around the top and than level the mounting ring off the top of the door assembly around the building and fasten it in place. It will then look like this. Now you would be ready to install the Dome and you would be done ready to enjoy your New Observatory
ExploraDome by PolyDome - 8-foot Round Explora Dome

 

Top Of Page

 
     
     
     
     
     
 
 
     
You are visitor 361890